Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(55)SE and Later

OL-22860-04

Documentation Updates

Error Message DOT1X_SWITCH-5-ERR_INVALID_PRIMARY_VLAN: Attempt to assign primary

VLAN [dec] to 802.1x port [chars] AuditSessionID [chars]

Explanation

An attempt was made to assign a primary VLAN to an 802.1x port, which is not allowed.

[dec] is the VLAN, the first [chars] is the port, and the second [chars] is the session ID.

Recommended Action Use a different VLAN.

Note This message applies to switches running the IP base image.

Error Message DOT1X_SWITCH-5-ERR_INVALID_SEC_VLAN: Attempt to assign invalid

secondary VLAN [dec] to PVLAN host 802.1x port [chars] AuditSessionID [chars]

Explanation

An attempt was made to assign a nonsecondary VLAN to a private VLAN host 802.1x

port. [dec] is the VLAN, the first [chars] is the port, and the second [chars] is the session ID.

Recommended Action Change the port mode so that it is no longer a PVLAN host port, or use a valid

secondary VLAN.

Note This message applies to switches running the IP base image.

Error Message DOT1X_SWITCH-5-ERR_PRIMARY_VLAN_NOT_FOUND: Attempt to assign VLAN

[dec], whose primary VLAN does not exist or is shutdown, to 802.1x port [chars]

AuditSessionID [chars]

Explanation

An attempt was made to assign a private VLAN whose primary VLAN does not exist or

is shut down. [dec] is the VLAN, the first [chars] is the port, and the second [chars] is the session ID.

Recommended Action Make sure that the primary VLAN exists and is not shut down. Verify that the

private VLAN is associated with a primary VLAN.

Note This message applies to switches running the IP base image.

Error Message DOT1X_SWITCH-5-ERR_SEC_VLAN_INVALID: Attempt to assign secondary VLAN

[dec] to non-PVLAN host 802.1x port [chars] AuditSessionID [chars]

Explanation

An attempt was made to assign a secondary VLAN to a port that is not a private VLAN

host port, which is not allowed. [dec] is the VLAN, the first [chars] is the port, and the second [chars]

is the session ID.

Recommended Action Change the port mode so that it is configured as a private VLAN host port, or

use a different VLAN that is not configured as a secondary VLAN.