Manualshelf

Cisco Catalyst Blade Switch 3120 for HP System Message Guide

ManualsBrandsHP ManualsComputer AccessoriesCisco Catalyst 1/10GbE 3120X Blade Switch
61626364656667686970
2-51
Cisco Catalyst Blade Switch 3120 for HP System Message Guide
OL-12249-01
Chapter 2 Message and Recovery Procedures
PLATFORM _IPC Messages
Error Message PLATFORM_HPLM-6-LABEL_START: VRF Label compaction started.
Explanation
The VRF label compaction process has started.
Recommended Action No action is required.
PLATFORM _IPC Messages
This section contains the Inter-Process Communication (IPC) protocol messages. The IPC protocol
handles communication between the stack master switch and stack member switches.
Error Message PLATFORM_IPC-3-COMMON: [chars].
Explanation
There has been an IPC failure. [chars] describes the error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.
Error Message PLATFORM_IPC-3-MASTER: [chars].
Explanation
There has been an IPC failure on the stack master. [chars] describes the error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.
Error Message PLATFORM_IPC-3-MAX_LENGTH_EXCEEDED: [chars].
Explanation
An internal IPC application error occurred when an IPC message was sent that exceeded
the maximum length. [chars] describes the error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.