Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-86
Cisco Catalyst Blade Switch 3120 for HP System Message Guide
OL-12249-01
Chapter 2 Message and Recovery Procedures
STACKMGR Messages
Error Message STACKMGR-3-MSG_FAIL: Failed to retrieve stack message from port-asic
[dec] in direction [dec].
Explanation
The stack manager module failed to retrieve stack messages. The first [dec] is the ASIC
ID, and the second [dec] is the direction.
Recommended Action No action is required.
Error Message STACKMGR-3-NORECORD: Switch removed event for switch [dec] with no
switch record.
Explanation
The stack manager received a switch-removed event for which there is no switch record.
[dec] is the switch number.
Recommended Action No action is required.
Error Message STACKMGR-4-MASTER_ELECTED: Switch [dec] has been elected as MASTER of
the stack.
Explanation
The specified switch has been elected stack master. [dec] is the switch number of the
elected stack master.
Recommended Action No action is required.
Error Message STACKMGR-4-STACK_LINK_CHANGE: Stack Port [chars] Switch [dec] has
changed to state [chars].
Explanation
The specified stack port status has changed state to up or down. The first [chars] is the
stack port (1 or 2), [dec] is the switch number, and the second [chars] is the new state (up or down).
Recommended Action No action is required.
Error Message STACKMGR-4-SWITCH_ADDED: Switch [dec] has been ADDED to the stack.
Explanation
The specified stack member switch has been added to the stack. [dec] is the switch
number.
Recommended Action No action is required.
Error Message STACKMGR-4-SWITCH_ADDED_SDM: Switch [dec] has been ADDED to the stack
(SDM_MISMATCH).
Explanation
The specified switch has been added to the stack. [dec] is the switch number.
SDM_MISMATCH means that the added switch cannot support the SDM template that the stack
master is using. Subsequent SDM-6-MISMATCH_ADVISE messages explain the mismatch and
recommend corrective actions.
Recommended Action No action is required unless SDM_MISMATCH is displayed. For
SDM_MISMATCH corrective actions, see SDM-6-MISMATCH_ADVISE.