Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide

Index
IN-39
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
RMON
default configuration
30-3
displaying status 30-6
enabling alarms and events 30-3
groups supported 30-2
overview 30-1
statistics
collecting group Ethernet
30-5
collecting group history 30-5
support for 1-12
root guard
described
19-10
enabling 19-18
support for 1-7
root switch
MSTP
18-17
STP 17-16
route calculation timers, OSPF 38-33
route dampening, BGP 38-63
routed packets, ACLs on 34-38
routed ports
configuring
38-5
defined 10-4
IP addresses on 10-22, 38-5
route-map command 38-91
route maps
BGP
38-55
policy-based routing 38-89
router ACLs
defined
34-2
types of 34-4
route reflectors, BGP 38-62
router ID, OSPF 38-35
route selection, BGP 38-53
route summarization, OSPF 38-32
route targets, VPN 38-68
routing
default
38-3
dynamic 38-3
redistribution of information 38-85
static 38-3
routing domain confederation, BGP 38-62
Routing Information Protocol
See RIP
routing protocol administrative distances
38-84
RSPAN 29-3
and stack changes 29-11
characteristics 29-9
configuration guidelines 29-17
default configuration 29-11
destination ports 29-8
displaying status 29-24
in a switch stack 29-2
interaction with other features 29-9
monitored ports 29-7
monitoring ports 29-8
overview 1-12, 29-1
received traffic 29-6
session limits 29-12
sessions
creating
29-18
defined 29-4
limiting source traffic to specific VLANs 29-20
specifying monitored ports 29-18
with ingress traffic enabled 29-22
source ports 29-7
transmitted traffic 29-6
VLAN-based 29-7
RSTP
active topology
18-10
BPDU
format
18-12
processing 18-13
designated port, defined 18-9
designated switch, defined 18-9