Safety and Regulatory

User Guide 15
➙帿ᮏ䟄厠ᕬᅾ୰ᅜ䘾ቃ㪖ᚿ帳幐ℶရⓗⱲ⦃୰㸪䘾ቃ㪖ᚿ⾲᫂年ℶရ୙⅔ရ德ྜ
᱁㸪⪋ୟᅾ⏕ℶࠊ౑⏝࿴⮓⌮⮓⨨扖⛬୰➢ྜ≉ᐃⓗ䘾ቃಖ㔳せồ㸪୚ྠ伊ℶရ┦
ẚ㸪ල᭷పẘᑡᐖࠊ唑儵忓※➼䘾ቃ↧╎㸪ᅾᅜᐙ䘾ቃಖ㔳㒊⨒❰
(
http://www.sepa.gov.cn) ୖྍ㿞屗฿යன䘾ቃ㪖ᚿⓗಙᜥࠋ
China PC energy label
In accordance with “The Regulation of the Implementation on China Energy Label for
Microcomputers” (CEL-30), this microcomputer has an Energy Efficiency Label. The energy
efficiency grade, TEC (Typical Energy Consumption), and product category presented on
the label are determined and calculated according to the standard GB28380-2012.
1. Energy Efficiency Grades
The grade is determined by the standard with the calculation of base consumption
level with the sum of all the allowances for additional components such as main
memory and graphics card. For products of any grade, the TEC should not exceed the
value specified in the following table:
2. Typical Energy Consumption
The energy consumption figure presented on the label is the data measured with the
representative configuration that covers all the configurations in the registration unit
which is selected according to CEL-30. Thus, actual energy consumption of this
specific microcomputer may not be the same as the TEC data presented in the label.
3. Product Category
Product Type
TEC (kilowatt hour)
Category Grade 1 Grade 2 Grade 3
Desktop
microcomputer, AIO
A 98.0+ΣEfa 148.0+ΣEfa 198.0+ΣEfa
B 125.0+ΣEfa 175.0+ΣEfa 225.0+ΣEfa
C 159.0+ΣEfa 209.0+ΣEfa 259.0+ΣEfa
D 184.0+ΣEfa 234.0+ΣEfa 284.0+ΣEfa
Portable Computer A 20.0+ΣEfa 35.0+ΣEfa 45.0+ΣEfa
B 26.0+ΣEfa 45.0+ΣEfa 65.0+ΣEfa
C 54.5+ΣEfa 75.0+ΣEfa 123.5+ΣEfa
✎
NOTE: ΣEfa is the sum of power factor of product additional functions.
NB_RegGuide_718033-002.book Page 15 Friday, March 15, 2013 3:44 PM