User's Manual

Removal and Installation
8-89
HP DesignJets 500, 510 and 800 Series Printers Service Manual
22. Remove 4 screws (T-25) that secure
the Top Part of the Printer to the
Bottom Part from the right hand side.
23. Make sure the Media Lever is in the
UP Position and lift the complete Top
Part of the Printer away from the
Bottom Part.
NOTE The Top Part of the Printer is
very heavy so 2 people should
perform this step.
24. Remove 1 screw (T-15) from the Axle
Spring.