User's Manual

Removal and Installation
8-48
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Ink Supply Station
Removal
WARNING Switch off the printer and remove the power cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Ink Cartridges.
2. Remove the Right Hand Cover - Refer
to Page 8-7.
3. Disconnect the Ink Supply Station
Cables (Connectors P2 and P4) from
the Interconnect PCA.
4. Release the Tubes Bracket from the
Ink Supply Station by pushing the
clips inwards and lifting up the
Bracket.
Lift up Bracket