User's Manual

Removal and Installation
8-19
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Media Sensor
Removal
WARNING Switch off the printer and remove the power cord.
1. Remove the Right Hand Cover - Refer
to Page 8-7.
2. Remove the Spindle.
3. Disconnect the Media Sensor Cable
from the ISS PCA.
4. Unclip the Media Sensor Cover and
remove from the Printer.
5. Unclip the Media Sensor from
underneath the Back Platen. Route the
Media Sensor cable out where
necessary and remove the Media
Sensor.