HP LaserJet Pro MFP M225, M226 - Warranty Guide and Legal Guide

Yderligere erklæringer for telekommunikationsprodukter (fax)
EU-erklæring om telekommunikationsdrift
Dette produkt er beregnet til tilslutning til de analoge, offentlige telefonnet (PSTN, Public Switched
Telecommunication Networks) i EEA-lande/områder (European Economic Area).
Det opfylder kravene i EU's R&TTE-direktiv 1999/5/EC (Bilag II) og bærer CE-mærket i overensstemmelse
hermed.
Få flere oplysninger om den overensstemmelseserklæring, som producenten har udsendt, i et andet afsnit i
denne vejledning.
På grund af forskelle mellem individuelle, nationale, offentlige telefonnet (PSTN'er) kan der ikke garanteres
ubetinget vellykket drift for produktet på alle PSTN-termineringspunkter. Netværkskompatibiliteten
afhænger af, at den korrekte indstilling bliver valgt af kunden under forberedelsen af dets tilslutning til det
offentlige telefonnet. Følg anvisningerne i brugervejledningen.
Hvis du oplever problemer med netværkskompatibilitet, skal du kontakte leverandøren af udstyret eller HP-
helpdesk i det land/område, hvor udstyret anvendes.
Tilslutning til et PSTN-termineringspunkt kan være underlagt yderligere krav fastsat af operatøren af det
lokale, offentlige telefonnet.
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected to the
same line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
back of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In
most, but not all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as determined by the total RENs, contact the telephone company
to determine the maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is
designed to be connected to the telephone network or premises wiring using a compatible modular jack,
40 Kapitel 3 Lovgivningsmæssige oplysninger DAWW