HP LaserJet Pro MFP M225, M226 - User Guide

NOTE: This prevents the product from sending a fax while someone is on the telephone.
a. On the product control panel, press or touch the Setup button.
b. Open the Fax Setup menu.
c. Open the Advanced Setup menu.
d. Select the Detect Dial Tone setting, and then select On.
6. Continue to
Step 3: Configure the fax time, date, and header on page 67.
Shared voice/fax line with an answering machine
Follow these steps to set up the product on a shared voice/fax line with an answering machine.
1. Disconnect any devices that are connected to the telephone jack.
2. Open the cover on the telephone-line-out port on the rear of the product.
3. Connect the telephone cable to the fax port on the product and to the telephone jack on the wall.
NOTE: Some countries/regions might require an adapter for the telephone cable that came with the
product.
NOTE: On some products, the fax port might be above the phone port. Refer to the icons on the
product.
ENWW Set up to send and receive faxes 65