HP LaserJet Enterprise 500 MFP M525 - Software Technical Reference

Switching between tabs does not change the location or appearance of the document preview image.
When you move the mouse over the document preview image, the mouse cursor changes from an
arrow to a gloved hand. You can toggle between portrait and landscape page orientation by clicking
the image.
Print Quality
The Print Quality group box contains the following controls:
●
Print Quality drop-down menu
●
EconoMode check box
Print Quality drop-down menu
The Print Quality drop-down menu contains the following options:
●
600 dpi: This setting prints using standard 600 dpi resolution.
●
FastRes1200 (default): This setting produces a resolution of 1200 x 600 dots per inch (dpi) This
mode is faster than 1200 x 1200 resolution, but has slightly lower print quality.
●
ProRes1200 (180 lpi): This setting prints using 1200 x 1200 resolution. It prints more slowly
than the other resolutions, but it has the best print quality.
●
ProRes1200 (141 lpi): This setting prints using 1200 x 1200 resolution. It prints more slowly
than the other resolutions, but it has the best print quality.
EconoMode check box
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use less
toner and decrease the cost per page. However, using EconoMode also can reduce print quality.
HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply
might outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these
circumstances, you will need to install a new print cartridge, even if there is toner supply remaining in
the cartridge.
82 Chapter 3 HP PCL 5, PCL 6, and PS emulation drivers for Windows® ENWW