HP LaserJet Enterprise 500 MFP M525 - Software Technical Reference
NOTE: Certain software programs can override the size command and specify different paper sizes
within a single document.
When you change the print-driver setting to a paper size that is not currently loaded in the product, a
control-panel message appears that prompts you to load the paper size or select another tray.
When the Settings under the Special pages section have been changed, the Paper sizes, Paper
source, and Paper type menus change also, offering a variety of options.
Custom Paper Size
The Custom Paper Size dialog box appears when you click Custom… on the Paper/Quality
tab. The following figure shows the initial appearance of the Custom Paper Size dialog box.
Figure 3-7 Custom Paper Size dialog box
NOTE: Both the HP LaserJet Enterprise 500 MFP M525 and HP LaserJet Enterprise flow MFP M525
products support custom paper sizes from 5 inches up to 14 inches in length and 3 inches up to 8.5
inches in width.
Name
Use the Name text box to type a new name for a custom paper size. When you change the name to
something other than Custom, the Save and OK buttons become active.
The name that appears in the Name text box depends on the following conditions:
●
If a saved custom paper size has been selected from the drop-down menu on the Paper/Quality
tab, then the Name text box shows the name of the selected custom paper size.
●
If a standard paper size has been selected on the Paper/Quality tab, then the Name text box
shows the default name of Custom .
●
If a new name has been typed into the Name text box for the purpose of saving a new size or
renaming an existing size, then that new name will remain in the text box until the new size is
saved or the dialog box is closed.
74 Chapter 3 HP PCL 5, PCL 6, and PS emulation drivers for Windows® ENWW