HP LaserJet Enterprise 500 MFP M525 - Software Technical Reference

If the Network button is not visible, you can find the IP address or host name by printing a
configuration page.
a. From the Home screen on the product control panel, scroll to and touch the Administration
button.
b. Open the following menus:
●
Reports
●
Configuration/Status Pages
c. Touch Configuration Page.
d. Touch the View button to view the information on the control panel, or touch the Print button
to print the pages.
e. Find the IP address on the Jetdirect page.
Config Report
Product Name = HP LaserJet 400 M475dw
Formatted Number = SF0013A
Serial Number = XXXXXXXXX
Service ID = 10125
Firmware DateCode = 20110504_0400 Phoenix Firmware
Smart Install SW Version = unknown
Telecom Version = 04-015-001
Location = USA
Device Location =
ADF Installed = Yes
Max Monochrome Print Quality = 600x8
Max Color Print Quality = ImageREt 3600
Controller Number = 53
Duplexer Version = 0
Total Memory = 192 MBytes
Available Memory = 57.91 MBytes
Memory
PCL6 = (20040201)
URF = (20040201)
PCL = (20040201)
PDF = (20040201)
PS = (20040201)
DIMM Slot 1 = Empty
USB Flash Drive = Empty
Installed Personalities and Options
Device Description = HP LaserJet M475dw
Language = English
Asset Number =
Your Company Name =
Contact Person =
Product Security = Off
HP Smart Install = Enabled
Wired HW Address = XX:XX:XX:XX:XX:XX
Wireless HW Address = XX:XX:XX:XX:XX:XX
Network In Use = None
Host Name = XXXXXXXXX
IPv4 Status = 192.168.0.10
IPv6 Status = XXXX::XXXX:XXXX:XXXX:XXXX
Product Settings
HP LASERJET 400 M475DW
2. IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, verify the product is
connected to a network. If the product is connected to a network and displaying the previously
listed IP addresses, you may have to manually configure the IP address. Otherwise, the network
configuration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you may
have to manually configure the IP address.
3. In a supported Web browser on a network-connected computer, type the product IP address or
host name in the address/URL field.
Features
Information tab
Table 1-7 HP Embedded Web Server Information tab
Menu Description
Device Status Shows the product status and shows the estimated life remaining of HP supplies. The
page also shows the type and size of paper set for each tray. To change the default
settings, click the Change Settings link.
Job Log Shows the print jobs printed on the product and provides the capability to view and
export the details for the print jobs.
ENWW
HP Embedded Web Server
19