HP LaserJet Enterprise 500 MFP M525 - Software Technical Reference

stack into the input tray to print the second side. The product control panel displays the following
screens while manual duplexing:
Figure 3-22 Manual duplexing
This setting is enabled by default.
Printer Memory
Boosts the ability of the product to handle large or complex print jobs. 44 x 32-pin DDR2 memory
DIMM, 1024 MB.
Printer Hard Disk
When this option is installed, the Job Storage option and the Mopier Mode are enabled in the
print driver. Use the Job Storage option to store print jobs and then print them later from the control
panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple,
collated copies from a single print job.
Job Storage
When Job Storage is enabled, the product can store print jobs so that you can gain access to those
print jobs later at the control panel.
Secure Printing
The new HP UPD option Encrypt Job (with password) is available for use with this printer and
provides end-to-end secure print job transmission with mutual authentication on the supported devices.
The print job is sent and stored encrypted, and can only be printed after entering the password on the
device.
Setting this to disabled results in the setting Encrypt Job not to be listed under Make Job Private/
Secure on the Job Storage tab.
The default is Automatic, enabling the setting to be selected from the Job Storage tab.
112 Chapter 3 HP PCL 5, PCL 6, and PS emulation drivers for Windows® ENWW