HP LaserJet Enterprise 500 MFP M525 - Software Technical Reference

Device Settings tab features
NOTE: The Device Settings tab is located on the Properties tab set.
Available options depend on the feature. The following figure shows the Device Settings tab.
Figure 3-19 Device Settings tab
The Device Settings tab contains controls for paper-handling devices and controls for managing the
HP LaserJet Enterprise 500 MFP M525 and the HP LaserJet Enterprise flow MFP M525 product.
The Device Settings tab contains the following controls:
●
Form to Tray Assignment
●
Font Substitution Table
●
Installable Options
Form to Tray Assignment
A network administrator can use Form to Tray Assignment to specify the paper size in each input
tray.
The HP LaserJet Enterprise 500 MFP M525 and the HP LaserJet Enterprise flow MFP M525 product
supports more than one source of paper. You can assign a form (which defines the paper size and
margins) to each paper source. When a form is matched to a source, you can select the form when you
print. The product prints from the tray to which that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the
paper size that is loaded into each available input tray. The use of forms constrains the choices that are
available in the paper-size list on the Paper/Quality tab in the Printing Preferences driver tabs.
ENWW
Device Settings tab features
107