HP LaserJet Enterprise 500 MFP M525 - Software Technical Reference

Stored Job
To use the Stored Job option, a hard disk must be installed on the product and the job-storage feature
must be enabled.
Use the Stored Job option to send a print job directly to the printer hard disk without printing it. The
print job is stored in the product as if it is an electronic file cabinet. After the print job is stored on the
printer hard disk, you can print the job at the product control panel.
The job remains stored in the product until it is deleted or overwritten by a document that has the same
user name and job name. Stored jobs remain on the printer hard disk when the product is turned off.
Use this feature for forms and other common or shared documents.
A stored job can be managed in two ways: as either a public or a private job .
To make a stored job public, set the Make Job Private/Secure dropdown box to None.
To make a stored job private, set the Make Job Private/Secure dropdown box to either PIN to
print or Encrypt Job (with password).
Select PIN to print in the Make Job Private/Secure dropdown box to set the private mode
(without encryption). The print job can be printed only after you type the correct, 4–digit PIN at the
control panel.
Select Encrypt Job (with password) to set the private mode with encryption.
After the job is printed, the job remains in the product and can be printed again at the product control
panel.
The group box labeled Make Job Private/Secure is usually inactive. The PIN to print and
Encrypt Job (with password) options only become available when you select Stored Job or
Personal Job. If you select PIN to print or Encrypt Job (with password), you must type a PIN
pr password to make the stored job private or else select None.
NOTE: A private stored job is not the same as a personal job. Personal jobs are deleted from the
product after they are printed. Private stored jobs are retained in the product after printing, but require
that a PIN be typed each time they are printed. A printer hard disk is required for Private stored jobs.
Make Job Private/Secure
The Make Job Private/Secure drop-down menu is available when Personal Job or Stored Job
is selected.
PIN to print
Select PIN to print from the drop-down menu, and then type a 4-digit PIN number in the box
provided. The personal or stored job is sent to the product, where you must enter the 4-digit PIN on the
control panel to retrieve the job.
100 Chapter 3 HP PCL 5, PCL 6, and PS emulation drivers for Windows® ENWW