HP Topshot LaserJet Pro M275 - Software Technical Reference

LaserJet toner cartridges. This software was developed for home, micro, and small business
environments.
●
Customer downloads the HP Toner Authentication software from HP.com and installs it on his or
her PC.
●
The software checks to see if the printer needs software or firmware upgrades
◦
Software or firmware upgrades can be installed by the customer.
● The software checks the e-labels on the toner cartridges and displays the results.
◦
By default the software checks every 60 minutes, but can be changed on the Settings tab
◦
The correct versions of software, firmware, e-labels, and an active internet connection are
required for HP Toner Authentication to work properly.
HP Device Toolbox
The HP Device Toolbox allows users to control settings on the product through a Web browser. This
program opens the HP Embedded Web Server (HP EWS).
To access the HP Device Toolbox, complete one of the following procedures:
●
Click the Windows Start button, click the Programs or All Programs item, click the HP item,
click the product group, and then click the HP Device Toolbox item.
●
On network-connected products, you can open a Web browser and type the product IP address
in the address bar.
The product IP address displays on the product control panel. If that feature is disabled, the IP
address is documented on a configuration page. Print a configuration page by following these steps
on the product control panel.
1.
At the product control panel, press the Setup
button.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to highlight the Config Report option, and then press the OK button.
4. Find the IP address on the configuration page.
Figure 2-18 IP address location on the configuration page
Config Report
Product Name = HP LaserJet 200 color
MFP M275nw
Formatted Number = T00000PS
Serial Number = XXXXXXXXX
Service ID = 00000
Firmware DateCode = 20110628_0020 Phoenix Firmware
Smart Install SW Version = 06/23/2010.1.0.11165.107
Location = USA
Device Location =
ADF Installed = Yes
Max Monochrome Print Quality = 600x8
Max Color Print Quality = ImageREt 2400
Controller Number = 40
Total Memory = 128 MBytes
Available Memory = 45.28 MBytes
Memory
PCL6 = (20040201)
URF = (20040201)
PCL = (20040201)
PDF = (20040201)
PS = (20040201)
Installed Personalities and Options
Device Description = HP LaserJet 200 color
MFP M275nw
Language = English
Asset Number =
Company Name =
Contact Person =
Product Security = Off
HP Smart Install = Enabled
Wired HW Address = XX:XX:XX:XX:XX:XX
Wireless HW Address = XX:XX:XX:XX:XX:XX
Network In Use = None
Host Name = XXXXXXXXX
IPv4 Status = 192.168.0.10
IPv6 Status = XXXX::XXXX:XXXX:XXXX:XXXX
Product Settings
HP LASERJET 200 COLOR MFP M275NW
The following tabs are available in the HP Device Toolbox:
ENWW
HP LaserJet software components for Windows
77