HP Topshot LaserJet Pro M275 - Software Technical Reference

Installable Options
Items under Installable Options are automatically populated and their default settings are set when
the driver is installed.
The product has printing options that you can install and configure in this section. The following
controls are available:
●
Allow Manual Duplexing
●
●
Job Separator
Allow Manual Duplexing
Select the Allow Manual Duplexing item to print on both sides of any supported size and most types
of paper (except transparencies, envelopes, and labels). To use this feature, you must reinsert the
paper stack into the input tray to print the second side. The product pauses while you make this
adjustment.
This setting is enabled by default.
Job Separator
Use this control to specify whether a print job identifier page should be printed between print jobs.
This setting is disabled by default.
About tab features
NOTE: The About tab is located on the Printer Properties tab set. For information about how to
access these tabs, see
Printer Properties driver tabs on page 15.
The About tab provides detailed information about driver component versions. It contains an overall
build version number (in parentheses after the model name) together with specific information about
each of the components. The information varies according to the product model number, driver, date,
and versions. The About tab is shown in the following figure.
ENWW
HP LaserJet software components for Windows
55