HP Topshot LaserJet Pro M275 - Software Technical Reference

Wireless Direct Setup
Use the Wireless Direct Setup page to enable devices within wireless range to connect to the
product and print.
Figure 2-43 HP Device Toolbox, Networking tab — Wireless Direct Setup page
Network Identification
Use the Network Identification pane to configure the Host name and Domain name(s) used to
identify the product on the network.
The values for Host name and Domain names are retrieved from the firmware, and displayed on this
pane. The Networking firmware determines what Host name and Domain name(s) to use.
The information under Available Host name / Domain names is for information only and cannot be
modified.
The text entries are disabled under certain circumstances. The following table defines when the
entities are disabled:
Table 2-11 Network Identification pane – Text Entities
Text Entity Disabled status
Host name Disabled if configured by BOOTP
Domain name (IPv4/IPv6) Disabled if configured by BOOTP, DHCPv4, or DHCPv6
ENWW
HP LaserJet software components for Windows
91