HP LaserJet Pro CP1020 - User Guide
Manage supplies and accessories
Correctly using, storing, and monitoring the print cartridge and imaging drum can help ensure high-quality
print output.
Print when a print cartridge or imaging drum is at estimated end of life
Supplies messages
<Supply> Low message—where <Supply> is the color print cartridge: The product indicates when a supply
level is low. Actual print cartridge life remaining may vary. Consider having a replacement available to install
when print quality is no longer acceptable. The supply does not need to be replaced now. This alert appears
only when <Supply> Very Low is set to Stop.
<Supply> Very Low message—where <Supply> is either the color print cartridge or imaging drum or a
combination of multiple print cartridges and/or the imaging drum: The product indicates when a supply level
is very low. Actual print cartridge life remaining may vary. Consider having a replacement available to install
when print quality is no longer acceptable. Print-quality problems may occur when using a supply that is at its
estimated end of life. The supply does not need to be replaced now unless the print quality is no longer
acceptable.
Once an HP print cartridge has reached “Very Low”, HP’s Premium Protection Warranty on that print cartridge
has ended. HP’s Premium Protection Warranty applies only to the print cartridge for this product.
The imaging drum installed in this product is covered by the product warranty. Replacement imaging drums
have a one year limited warranty from the date of installation. The imaging drum installation date displays on
both the conguration page and on the supplies status page when the imaging drum reaches approximately
30% of its estimated remaining life.
Enable or disable the At Very Low settings
You can change the default settings at any time and do not need to re-enable the settings when a new print
cartridge is installed. The <Supply> Very Low alert message displays when a print cartridge is set to Continue
At Very Low. Once an HP print cartridge has reached “Very Low”, HP’s Premium Protection Warranty on that
cartridge has ended.
1. In the Windows system tray, right-click the Device Settings icon and then click the product name.
2. Click the System Setup tab.
3. From the At Very Low drop-down list, select one of the following options:
●
Select the Continue option set the product to alert you that the print cartridge is very low, but to
continue printing.
●
Select the Stop option to set the product to alert you and stop printing until you replace the print
cartridge.
●
Select the Prompt (the default) option to set the product to stop printing and prompt you to
replace the print cartridge. You can acknowledge the prompt and continue printing.
Manage print cartridges and imaging drums
Print-cartridge and imaging drum storage
Do not remove the print cartridge or imaging drum from their packages until you are ready to use them.
ENWW Manage supplies and accessories 81