HP LaserJet Pro CP1020 - User Guide

Tab or section Description
Status tab
Provides product, status, and
conguration information.
●
Device Status: Shows the product status and shows the life remaining of HP supplies,
with 0% indicating that a supply is empty.
●
Supplies Status: Shows the approximate percent life remaining of HP supplies. When the
estimated life remaining is less than 10% but has not reached the estimated end of life,
Less Than 10% displays. When a supply reaches its estimated end of life –% displays.
Actual supply life remaining can vary. Consider having a replacement supply available to
install when print quality is no longer acceptable. The supply does not need to be
replaced unless the print quality is no longer acceptable. When an HP supply has reached
“Very Low”, HP’s Premium Protection Warranty on that supply ends.
The imaging drum's estimated remaining life and installation date displays when less
than approximately 30% of its estimated life remains.
●
Device Conguration: Shows the information found on the product Conguration page.
●
Network Summary: Shows the information found on the product Network Conguration
page.
●
Reports: Allows you to print the conguration and supplies status pages that the product
generates.
●
Event Log: Shows a list of all product events and errors.
●
Support button: Provides a link to the product support page. The Support button can be
password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies for the
product. The Shop for Supplies button can be password-protected.
System tab
Provides the ability to congure the
product from your computer.
●
Paper Setup: Allows you to change the paper-handling defaults for the product.
●
Print Quality: Allows you to change the print quality defaults for the product, including
calibration settings.
●
Print Density: Allows you to change the contrasts, highlights, midtones, and shadows
values for each supply.
●
Paper Types: Allows you to congure print modes that correspond to the media types
that the product accepts.
●
System Setup: Allows you to change the system defaults for the product.
●
Service: Allows you to start the cleaning procedure on the product.
●
Product Security: Allows you to set or change the Administrator password.
●
Support button: Provides a link to the product support page. The Support button can be
password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies for the
product. The Shop for Supplies button can be password-protected.
NOTE: The System tab can be password-protected. If this product is on a network, always
consult with the printer administrator before changing settings on this tab.
Networking tab
Provides the ability to change
network settings from your
computer.
Network administrators can use this tab to control network-related settings for the product
when it is connected to an IP-based network. This tab does not appear if the product is directly
connected to a computer.
78 Chapter 8 Manage and maintain the product ENWW