HP LaserJet Pro CP1020 - User Guide
Understand paper use
This product supports a variety of paper and other print media in accordance with the guidelines in this user
guide. Paper or print media that does not meet these guidelines might cause poor print quality, increased
jams, and premature wear on the product.
For best results, use only HP-brand paper and print media designed for laser printers or multiuse. Do not use
paper or print media made for inkjet printers. HP Company cannot recommend the use of other brands of
media because HP cannot control their quality.
It is possible for paper to meet all of the guidelines in this user guide and still not produce satisfactory results.
This might be the result of improper handling, unacceptable temperature and/or humidity levels, or other
variables over which HP has no control.
CAUTION: Using paper or print media that does not meet HP's specications might cause problems for the
product, requiring repair. This repair is not covered by the HP warranty or service agreements.
Special paper guidelines
This product supports printing on special media. Use the following guidelines to obtain satisfactory results.
When using special paper or print media, be sure to set the type and size in the printer driver to obtain the
best results.
CAUTION: HP LaserJet products use fusers to bond dry toner particles to the paper in very precise dots. HP
laser paper is designed to withstand this extreme heat. Using inkjet paper could damage the product.
Media type Do Do not
Envelopes
●
Store envelopes at.
●
Use envelopes where the seam
extends all the way to the corner of
the envelope.
●
Use peel-o adhesive strips that are
approved for use in laser printers.
●
Do not use envelopes that are
wrinkled, nicked, stuck together, or
otherwise damaged.
●
Do not use envelopes that have
clasps, snaps, windows, or coated
linings.
●
Do not use self-stick adhesives or
other synthetic materials.
Labels
●
Use only labels that have no exposed
backing between them.
●
Use labels that lie at.
●
Use only full sheets of labels.
●
Do not use labels that have wrinkles
or bubbles, or are damaged.
●
Do not print partial sheets of labels.
Transparencies
●
Use only transparencies that are
approved for use in color laser
printers.
●
Place transparencies on a at surface
after removing them from the
product.
●
Do not use transparent print media
not approved for laser printers.
Letterhead or preprinted forms
●
Use only letterhead or forms
approved for use in laser printers.
●
Do not use raised or metallic
letterhead.
34 Chapter 5 Paper and print media ENWW