HP LaserJet Pro CP1020 - User Guide
Change print job settings for Windows
Tool for changing the settings Method for changing the settings Duration of changes Hierarchy of changes
Software program settings On the File menu in the software
program, click Page Setup or a
similar command.
These settings are in eect for the
current print job only.
Settings changed here override
settings changed anywhere else.
Printer Properties in the software
program
The steps vary for each software
program. This procedure is most
common.
1. On the File menu in the
software program, click
Print.
2. Select the product, and then
click Properties or
Preferences.
3. Change the settings on any of
the tabs.
These settings are in eect for the
current session of the software
program.
Settings changed here override
default printer driver settings and
default product settings.
Default printer driver settings 1. Open the list of printers on
your computer, and select
this product.
NOTE: This step varies for
each operating system.
2. Click Printer, and then click
Printing Preferences.
3. Change the settings on any of
the tabs.
These settings remain in eect
until you change them again.
NOTE: This method changes the
default settings for the printer
driver for all software programs.
You can override these settings by
changing settings in the software
program.
ENWW Change print job settings for Windows 9