HP LaserJet Pro CP1020 - User Guide

Table 9-2 Control-panel light patterns (continued)
Light status State of the product Action
Cartridge and attention lights blink. The print cartridge is very low and has
reached the end of its estimated useful life.
When the supply has reached this condition,
the HP Premium Protection warranty for
that supply has ended.
You do not need to replace the print
cartridge at this time unless print quality is
no longer acceptable. Press the Resume
button to continue.
A non-HP print cartridge in use. You do not need to replace the print
cartridge at this time unless print quality is
no longer acceptable. Press the Resume
button to continue.
Print cartridge is rotating. No action is required. Wait for the rotation
period to end. The product should enter the
previous state when the rotation period is
nished.
Cartridge and ready lights are on. The print cartridge has reached the end of
its estimated useful life. When the supply
has reached this condition, the HP Premium
Protection warranty for that supply has
ended.
You do not need to replace the print
cartridge at this time unless print quality is
no longer acceptable.
Non-HP print cartridge in use and is very
low.
No action is required.
Table 9-3 Wireless light patterns
Light status State of the product Action
Wireless light is o. The wireless connection is turned o.
Press and hold the Wireless button for 2
seconds to turn on the WPS
.
The Ethernet is connected. No action is required.
Wireless light blinks.
The product is trying to establish a wireless
c
onnection.
No action is r
equir
ed.
There is a WPS error. Attempt to connect again.
Wireless light is on.
The product has established a wireless
connection.
No action is requir
ed.
ENWW Interpret control panel light patterns 101