HP Color LaserJet Pro CP1020 Series - Getting Started Guide

1
Português ....... 10
Español ............. 7
Français ............ 4
English .............. 1
.............. 13
Built-in wireless network connection
(CP1025nw model only)
1. To connect the printer to a wireless (Wi-Fi) network, make sure that
the printer, access point, and computer are all turned on, and that the
computer is connected to the wireless network.
2. A USB cable will be required.
3. Disconnect any USB or Ethernet cable that is connected to the printer.
4. To print from a computer, continue to “5. Locate or download the
software installation les.” To print from a phone or tablet only,
continue with “7. Mobile and wireless printing (optional).”
NOTE: During software installation, select the option to Congure to print
over the Wireless Network.
Manually congure the IP address
For information on how to manually congure the IP address, see the printer
User Guide www.hp.com/support/ljcp1020series.
Wired (Ethernet) network connection
(CP1025nw model only)
Use a standard network cable.
1. Connect the network cable to the printer and to the network. Wait a few
minutes for the printer to acquire a network address.
2. Print a Network Conguration Page to identify the printer IP address.
Onthe control panel, press and hold the Cancel
button until the
ready light starts to blink, and then release the button. The test
page prints. Notethe IP address for use during software installation.
Example IP address: 192.168.0.1
To manually congure the IP address, see Manually congure the
IPaddress.”
3. Continue with “5. Locate or download the software installation les.”
NOTE: During software installation, select the option to Congure to
print over the Network.
IMPORTANT:
Follow
Steps 1 - 3 on
the printer hardware setup
poster, then continue
with Step 4 to the right.
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable.
Windows
1. For Windows 7 or lower, do not connect the USB cable before installing the software.
Theinstallation process prompts to connect the cable at the appropriate time. If the
cable is already connected, restart the printer when installation prompts to connect
thecable.
2. Continue with “5. Locate or download the software installation les.”
NOTE: During software installation, select the option to Congure to print using USB.
Mac
1. Connect the USB cable between the computer and the printer before installing
thesoftware.
2. Continue with “5. Locate or download the software installation les.”
www.hp.com/support/ljcp1020series www.register.hp.com
Color LaserJet Pro
CP1020 Series
Getting Started Guide
2
4.
Select a connection method and prepare
for software installation

Summary of content (16 pages)