HP LaserJet, HP PageWide - Secure by Default Initiative (white paper)

10
Fleet Tool or
Print Solution
Minimum Compatible
Solution version if
impacted
Impact to Customers
New device deployment OR Upgraded
devices after performing a Format Disk,
Partial clean or Cold Reset
Available Workarounds
JetAdvantage
Management
/Smart Device
Services
JAM/SDS
20171009.8/JAMC
4.1.2986 or later
SDS features that require SNMP write access (ex:
Remote Reboot or Supplies Message
Suppression) must turn on SNMPv1/v2 writes or
SNMPv3 credentials.
Use WJA 10.4-SR2 w/FP6, HP SM 3.1 or EWS
to enable SNMPv1/v2 write access
LRS MFPsecure
All versions of
MFPsecure are
impacted.
PJL disk access and PJL Device Access Commands
required for installation and configuration of
MFPsecure.
Use WJA, HP SM or EWS to enable PJL disk
access and PJL Device Access Commands for
installation and configuration.
Following installation/configuration, PJL disk
access can be disabled again.
Safecom
Latest SafeCom Agent
*31.25 or Newer
Basic testing shows no impact.
Contact the Solution Partner for confirmation of
Support before deploying.
Equitrac
Equitrac 5.7 WITH
Hotfix(v 294662 ) or
newer only
Basic testing shows no impact.
Contact the Solution Partner for confirmation of
Support before deploying.
Troy
Customer/Account
team should contact
Troy for compatibility
information
TROY has stated that depending on the customer
and configuration of their solution they should
perform a POC and then work with TROY Group to
further diagnose.
Pharos and
Celiveo
The changes have been
communicated to
Partners.
Contact the Solution Partner for confirmation of
Support before deploying.
Partner Solutions
(Silver)
The changes have been
communicated to
Partners.
Contact the Solution Partner for confirmation of
Support before deploying.
DSS
Version 5.0 and earlier
Unable to configure DSS workflows with CSRF
enabled on FS 3.9.2 or later
Use WJA, HP SM or EWS to disable CSRF for
configuration of DSS workflows.
ePrint
No impact
JetAdvantage
Connect
No impact
Windows
operating system
support for TLS
1.1 / 1.2
Windows Server 2008
R2 and higher
Windows Vista and
higher
TLS 1.0 required for print devices accessing
solutions running on Windows OS not supporting
TLS 1.1 / 1.2
Use WJA, HP SM or EWS to enable TLS 1.0 for
print devices with FutureSmart bundle 4.7.1
or previous.