HP Color LaserJet Enterprise CP5520 - User guide

Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv6 address.
1. Press the Home button
.
2. Press the down arrow
to highlight the Administration menu, and then press the OK button.
3. Press the down arrow
to highlight the Network Settings menu, and then press the OK
button.
4. Press the down arrow
to highlight the Embedded Jetdirect menu, and then press the OK
button.
5. Press the down arrow
to highlight the TCP/IP menu, and then press the OK button.
6. Press the down arrow
to highlight the IPv6 Settings menu, and then press the OK button.
7. Press the down arrow
to highlight the Address menu, and then press the OK button.
8. Press the OK button to select the Manual Settings menu.
9. Press the down arrow
to highlight the Address option, and then press the OK button.
10. Press the up arrow
or the down arrow to select the first character of the address. Press the OK
button.
Repeat this process for each character in the address.
NOTE: You must press the OK button after entering each character.
11. After entering all of the address characters, press the up arrow or the down arrow to select
the stop character
. Press the OK button.
12. Press the Home button
to return to the Ready state.
68 Chapter 5 Connect the product ENWW