HP Color LaserJet CM6030 and CM6040 MFP Series - Embedded Web Server

Sleep Schedule
An IT administrator can use the Sleep Schedule screen to schedule product sleep schedules and wake
times on a daily basis. For example, the product can be set to wake up at 07:30, so the product has
finished initializing and calibrating and is ready to use by 08:00. The administrator sets only one wakeup
setting per day; however, each day can have a different wakeup setting. Additionally, to save energy,
the sleep delay can be set to turn the product off after a specific period of inactivity.
Figure 3-24 Sleep Schedule screen
1
2
3
4
Table 3-13 Wake Time
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server
on page 4.
2 Wake Time Select one or more days on which to use the wakeup setting, and then set the time
the product is turned on each day.
3 Sleep Time Select one or more days on which to use the sleep setting, and then set the time
the product returns to Sleep Mode each day.
4 Sleep Delay Set the amount of time the product is idle before it goes into Sleep Mode. When the
product is in Sleep Mode, it uses less energy.
64 Chapter 3 Configuring the product from the Settings screens ENWW