HP Color LaserJet CM6030 and CM6040 MFP Series - Embedded Web Server

NOTE: Intermediate Menu Lock
is a stand-alone menu. It does not
build on other menus.
●
Maximum Menu Lock. Locks out
the menus locked by Minimum
Menu Lock and Moderate Menu
Lock, plus the PRINTING MENU,
INFORMATION MENU, and the
Job Cancel key.
NOTE: If the menu item is locked, any
attempt by the user to change a variable
from the front panel will generate a
warning on the control panel display
indicating that the control panel menus
are locked.
7 Embedded Web Server Options Use this feature to display or hide
Embedded Web Server pages as well as
to enable or disable some capabilities of
the device.
8 Options for Services Use this feature to enable services for
the printer:
●
Remote Firmware Upgrade.
Allows you to enable or disable
upgrades to the device firmware.
●
Service Loading. Allows you to
enable or disable the ability for
third-party applications to load
custom services on the device.
●
Job Retention. Allows you to
enable or disable Job Retention
capabilities (Job Hold, Proof,
Store, and PIN Printing).
9 Direct Ports (USB/IEEE 1284) Use this feature to force users to
communicate with the device over a
network. Setting this option allows more
control of device usage by enforcing
network defined permissions.
When this setting is applied, the device
turns off and then back on to disable the
direct port.
HP Jetdirect Security Configuration Wizard
Use the HP Jetdirect Security Configuration Wizard to configure security settings for HP Jetdirect
print server management.
HP Web Jetadmin is a powerful web-based software utility for installing, configuring, and managing
network-connected devices. Since it can install and configure devices, it must be able to secure itself
against unwanted access. Not only can it secure itself against unwanted users, it can also secure the
devices it manages against unwanted access. Securing devices is important for the following reasons:
●
Reduce printer down time
●
Reduce help desk calls
42 Chapter 3 Configuring the product from the Settings screens ENWW