HP Color LaserJet CM6030 and CM6040 MFP Series - Embedded Web Server

Callout Area on the screen Information or capability that the area provides

4 Perform Secure Storage Erase

button

The Perform Secure Storage Erase button allows you to perform disk wipes

that will remove all data that has been stored on any mass storage unit

attached to the device.

NOTE: The settings for the type of Secure Storage Erase to be performed

can be configured in the File Erase Mode section of the device's security

settings page.

NOTE: The device's file system password must be set before a Secure

Storage Erase operation can be performed. The file system password can

be set in the File System Password section of the device's security settings

page. See

Configure Security Settings on page 38.

NOTE: This button does not appear if the device does not have a mass

storage device installed.

5 Status of Security Settings This section presents a summary of the current security settings on the

device. These settings can be modified by clicking on the Configure

Security Settings button.

Configure Security Settings

Use the Configure Security Settings screen to set the desired levels of security. The following

illustration and table describe how to use this screen.

Figure 3-10 Configure Security Settings screen – 1 of 2

Table 3-6 Security (continued)

38 Chapter 3 Configuring the product from the Settings screens ENWW