HP Color LaserJet CM6030 and CM6040 MFP Series - Embedded Web Server

Device Status
Use the Device Status screen to view the current status of the product. The following illustration and
table describe how to use this screen.
Figure 2-1 Device Status screen
1
2
3
4
5
6
7
Table 2-1 Device Status
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and
menus
For more information, see Navigating through the HP Embedded Web Server
on page 4.
2 Status Shows the device status (the same information that appears on the control-panel
display).
If the device requires user intervention, a Help image appears in this area providing
instructions in a pop-up window.
3 Control-panel buttons Use these control-panel buttons just as you would at the product. To select which
control-panel buttons appear on this screen, go to the Security screen on the
Settings tab.
4 Supplies Shows the percentage of life remaining for each supply.
5 Supplies Details Opens the Supplies Status screen, where you can view information about product
supplies.
6 Media Shows the status and configuration information for the input trays and output bins.
The media status is OK until the tray is completely empty. When the tray is empty,
the status is Out.
7 Change Settings Takes you to the Settings tab, where you can configure settings for the device.
8 Chapter 2 Viewing product status from the HP EWS Information screens ENWW