HP Color LaserJet CM6030 and CM6040 MFP Series - Embedded Web Server

Advanced Fax Settings
The following illustration and table describe how to use the Advanced Fax Settings screen.
Figure 5-2 Advanced Fax Settings screen
1
2
3
4
5
6
7
8
9
Table 5-2 Advanced Fax Settings
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and
menus
For more information, see Navigating through the HP Embedded Web Server
on page 4.
2 Help Click to open a help file that contains information about the screens on the Digital
Sending tab.
3 General Select the general settings, such as modem and ringer volume and whether to turn
JBIG compression and Error Correction on or off.
4 Send Select the settings for faxes that are sent from the product, such as whether to
check for a dial tone before sending, whether the header should appear at the top
of the fax, or how many times you want the product to retry if the receiving fax line
is busy or does not answer.
5 Receive Select the settings for received faxes, such as which output bin the faxes are to be
delivered, if you want incoming faxes to be scaled to the size of paper in the input
98 Chapter 5 Using fax functions ENWW