HP LaserJet Printers - Using the HP AutoSend feature in the Embedded Web Server (white paper)

To enable HP AutoSend on FutureSmart devices:
When sending the machine metrics through the AutoSend feature HP recommend
using the HTTPs post. If your network does not allow this please configure the data to
be sent through your Outgoing E-Mail server. Both Steps are listed below.
Setting up AutoSend:
1) After launching a web browser and connecting to the EWS, select the General tab.
2) Note: In order to see the General tab, you may need to be logged in as admin.
3) Next, select AutoSend from the menu on the left side of the screen. This should
lead you to a screen shown below.
4) Select the Enable AutoSend check box.
5) Select the frequency that you would like to have this data sent from the device.
6) Select Send on failure and Include detailed error information.
7) Select Send to HP