HP LaserJet P3010 Series - User Guide

Use paper output options
Print to the top (standard) output bin
The top output bin collects paper face-down, in the correct order. The top output bin should be used for most
print jobs, including transparencies. To use the top output bin, be sure that the rear output bin is closed. To avoid
jams, do not open or close the rear output bin while the product is printing.
1
Print to the rear output bin
The product always prints to the rear output bin if it is open. Paper that is printed to this bin will exit face-up, with
the last page on top (reverse order).
Printing from Tray 1 to the rear output bin provides the straightest path. Opening the rear output bin might
improve performance with the following items:
●
Envelopes
●
Labels
●
Small custom-size paper
●
Postcards
●
Paper heavier than 120 g/m
2
(32 lb)
To open the rear output bin, grasp the handle at the top of the bin. Pull the bin down to a 45° angle, and slide out
the extension.
Opening the rear output bin makes the duplexer and the top output bin unavailable. To avoid jams, do not open
or close the rear output bin while the product is printing.
ENWW Use paper output options 87