HP LaserJet P3010 Series - User Guide

Disable network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the following
benets:
●
Decreases product-generated network traic
●
Prevents unauthorized users from printing to the product
●
Provides only pertinent information on the conguration page
●
Allows the product control panel to display protocol-specic error and warning messages
Disable IPX/SPX, AppleTalk, or DLC/LLC
NOTE: Do not disable IPX/SPX in Windows-based systems that print through IPX/SPX.
1. Press the Menu button .
2. Open each of the following menus. Press the down arrow to highlight it and then press the OK button to
select it.
a. CONFIGURE DEVICE
b. I/O
c. EMBEDDED JETDIRECT MENU
d. IPX/SPX, APPLETALK, or DLC/LLC
e. ENABLE
f. OFF
3. Press the Menu button to return to the Ready state.
68 Chapter 5 Connectivity ENWW