HP LaserJet P3010 Series - User Guide

Item Sub-item Sub-item Values Description
PRINT RESULTS YES
NO*
If the ping test was not set for continuous
operation, you can print the test results.
EXECUTE YES
NO*
Specify whether to initiate the ping test.
PING RESULTS View the ping test status and results on the
control panel display. You can select the
following items:
PACKETS SENT Shows the number of packets (0 - 65535) sent
to the remote host since the most recent test
was initiated or completed. The default is 0.
PACKETS RECEIVED Shows the number of packets (0 - 65535)
received from the remote host since the most
recent test was initiated or completed. The
default is 0.
PERCENT LOST Shows the percent (0 to 100) of ping test packets
that were sent with no response from the
remote host since the most recent test was
initiated or completed. The default is 0.
RTT MIN Shows the minimum detected round-trip- time
(RTT), from 0 to 4096 milliseconds, for packet
transmission and response. The default is 0.
RTT MAX Shows the maximum detected round-trip- time
(RTT), from 0 to 4096 milliseconds, for packet
transmission and response. The default is 0.
RTT AVERAGE Shows the average round-trip-time (RTT), from 0
to 4096 milliseconds, for packet transmission
and response. The default is 0.
PING IN PROGRESS YES
NO*
Select whether the control panel indicates when
a ping test is in progress.
ENWW Congure device menu 35