HP LaserJet P3010 Series - User Guide

Item Sub-item Sub-item Values Description
SECONDARY DNS Specify the IP address (n.n.n.n) of a Secondary
Domain Name System (DNS) Server.
IPV6 SETTINGS ENABLE ON*
OFF
Enable or disable IPv6 operation on the print
server.
ADDRESS MANUAL SETTINGS
●
ENABLE
●
ADDRESS
Enable and manually congure a TCP/IPv6
address.
ENABLE: Choose ON to enable manual
conguration, or OFF to disable manual
conguration. The default is OFF.
ADDRESS: Type a 32 hexadecimal digit IPv6 node
address that uses the colon hexadecimal syntax.
DHCPV6 POLICY ROUTER SPECIFIED*
ROUTER UNAVAILABLE
ALWAYS
ROUTER SPECIFIED: The stateful auto-
conguration method to be used by the print
server is determined by a router. The router
species whether the print server obtains its
address, its conguration information, or both
from a DHCPv6 server.
ROUTER UNAVAILABLE: If a router is not
available, the print server should attempt to
obtain its stateful conguration from a DHCPv6
server.
ALWAYS: Whether or not a router is available, the
print server always attempts to obtain its
stateful conguration from a DHCPv6 server.
PRIMARY DNS Specify an IPv6 address for a primary DNS server
that the print server should use.
SECONDARY DNS Specify an IPv6 address for a secondary DNS
server that the print server should use.
PROXY SERVER Species the proxy server to be used by
embedded applications in the product. A proxy
server is typically used by network clients for
Internet access. It caches Web pages, and
provides a degree of Internet security, for those
clients.
To specify a proxy server, enter its IPv4 address
or fully-qualied domain name. The name can be
up to 255 octets.
For some networks, you might need to contact
your Internet Service Provider (ISP) for the proxy
server address.
PROXY PORT Type the port number used by the proxy server
for client support. The port number identies the
port reserved for proxy activity on your network,
and can be a value from 0 to 65535.
IDLE TIMEOUT Congure the time period, in seconds, after
which an idle TCP print data connection is closed
(default is 270 seconds, 0 disables the timeout).
32 Chapter 2 Control panel ENWW