HP LaserJet P3010 Series - User Guide
I/O menu
Items on the I/O (input/output) menu aect the communication between the product and the computer. If the
product contains an HP Jetdirect print server, you can congure basic networking parameters by using this
submenu. You can also congure these and other parameters through HP Web Jetadmin or the embedded Web
server.
For more information on these options, see Network conguration on page 63.
To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the I/O menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.
Item Sub-item Values Description
I/O TIMEOUT Range: 5 - 300 Set the product I/O TIMEOUT in
seconds. The default is 15 seconds.
Adjust timeout for the best
performance. If data from other ports
appears in the middle of your print
job, increase the timeout value.
EMBEDDED JETDIRECT MENU
EIO <X> JETDIRECT MENU
See the next table for a list of options.
Embedded Jetdirect and EIO <X> Jetdirect menus
Item Sub-item Sub-item Values Description
INFORMATION PRINT SEC PAGE YES*
NO
YES: Prints a page that contains the current
security settings on the HP Jetdirect print server.
NO: A security settings page is not printed.
TCP/IP ENABLE ON*
OFF
ON: Enable the TCP/IP protocol.
OFF: Disable the TCP/IP protocol.
HOST NAME An alphanumeric string, up to 32 characters,
used to identify the product. This name is listed
on the HP Jetdirect conguration page. The
default host name is NPIxxxxxx, where xxxxxx is
the last six digits of the LAN hardware (MAC)
address.
30 Chapter 2 Control panel ENWW