HP LaserJet P3010 Series - User Guide

Item Sub-item Sub-item Values Description
OPTIMIZE Optimize various print modes to solve print-
quality issues.
RESTORE OPTIMIZE Return all the settings in the OPTIMIZE menu
to the factory-default values.
RESOLUTION 300
600
FASTRES 1200*
PRORES 1200
Sets the resolution at which the product
prints.
300: Produces draft print quality.
600: Produces high print quality for text.
FASTRES 1200: Produces 1200-dpi print
quality for fast, high-quality printing of
business text and graphics.
PRORES 1200: Produces 1200-dpi print
quality for fast, high-quality printing of line
art and graphic images.
RET OFF
LIGHT
MEDIUM*
DARK
Use the Resolution Enhancement technology
(REt) setting to produce print with smooth
angles, curves, and edges.
REt does not aect print quality if the
resolution is set to the FASTRES 1200 or
PRORES 1200 settings. All other print
resolutions benet from REt.
ECONOMODE OFF*
ON
EconoMode is a feature that allows the
product to use less toner per page. Selecting
this option extends the life of the toner
supply and might reduce the cost per page.
However, it also reduces print quality. The
printed page is adequate for printing drafts.
HP does not recommend full-time use of
EconoMode. If EconoMode is used full-time,
the toner supply might outlast the
mechanical parts in the print cartridge. If
print quality begins to degrade under these
circumstances, you will need to install a new
print cartridge, even if there is toner supply
remaining in the cartridge.
TONER DENSITY 1 to 5 Lighten or darken the print on the page. The
lightest setting is 1, and the darkest setting is
5. The default setting of 3 usually produces
the best results.
AUTO CLEANING OFF*
ON
When auto-cleaning is on, the product prints
a cleaning page when the page count
reaches the CLEANING INTERVAL setting.
24 Chapter 2 Control panel ENWW