HP LaserJet P3010 Series - User Guide
Item Values Description
SUPPRESS BLANK PAGES NO*
YES
When generating your own PCL, extra form feeds are included
that would cause a blank page to be printed. Select YES for form
feeds to be ignored if the page is blank.
MEDIA SOURCE MAPPING The PCL5 MEDIA SOURCE MAPPING command selects an input
tray by a number that maps to the various available trays and
feeders.
STANDARD* The numbering is based on newer HP LaserJet printers with
updated changes to the numbering of trays and feeders.
CLASSIC The numbering is based on HP LaserJet 4 printers and earlier
models.
Print Quality menu
To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the PRINT QUALITY
menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.
Item Sub-item Sub-item Values Description
SET REGISTRATION For each tray, setting the registration shifts
the margin alignment to center the image on
the page from top to bottom and from left to
right. You can also align the image on the
front with the image printed on the back.
ADJUST TRAY <X> PRINT TEST PAGE
X1 SHIFT
Y1 SHIFT
X2 SHIFT
Y2 SHIFT
Shift from -20 to 20
along the X or Y
axes. 0 is the
default.
Print a test page and perform the alignment
procedure for each tray.
When it creates an image, the product scans
across the page from side to side as the
sheet feeds from top to bottom into the
product.
The scan direction is referred to as X. X1 is
the scan direction for a single-sided page or
for the rst side of a two-sided page. X2 is
the scan direction for the second side of a
two-sided page.
The feed direction is referred to as Y. Y1 is
the feed direction for a single-sided page or
for the rst side of a two-sided page. Y2 is
the feed direction for the second side of a
two-sided page.
FUSER MODES A list of paper types displays. NORMAL
HIGH2
HIGH1
LOW
LOW1
Each paper type has a default fuser mode.
Change the fuser mode only if you are
experiencing problems printing on certain
paper types. After you select a type of paper,
you can select a fuser mode that is available
for that type.
RESTORE MODES Return all fuser-mode settings to the
factory-default settings.
ENWW Congure device menu 23