HP LaserJet P3010 Series - User Guide

Problem Cause Solution
Unexpected les are on the USB accessory. Each time you turn it on, the product
automatically creates three les on attached
USB accessories.
Remove the USB accessory before you turn
on the product.
Some USB accessories have a lock feature
that prevents new les from being written
to the accessory. If your USB accessory has
this feature, lock the accessory.
The le is not listed in the USB STORAGE
menu.
The USB printing feature does not support
the type of le you are printing.
You can print the following types of les:
●
.PDF
●
.XPS
●
.PCL
●
.PS
Too many les are in a single folder on the
USB accessory.
Reduce the number of les in the folder by
moving them to subfolders.
The product does not support the language
of the le name, and it has replaced the le
name with characters from a dierent
character set.
Rename the les in a supported language.
The USB STORAGE menu opens, but the USB
accessory is not listed.
Too many USB accessories are connected to
the product.
Remove USB accessories until the message
goes away, and then remove and reinsert
the USB accessory from which you want to
print.
This product supports up to four USB
accessories.
File names are blurry or hard to read when
scrolling through the list on the control
panel.
The control-panel display brightness needs
adjustment.
Open the SYSTEM SETUP menu, and adjust
the DISPLAY BRIGHTNESS setting until the
text is clear.
190 Chapter 10 Solve problems ENWW