HP LaserJet P3010 Series - User Guide
Table 10-1 Control-panel messages (continued)
Control panel message Description Recommended action
USB ACCESSORY NEEDS TOO MUCH POWER
Remove USB accessory and then turn o then on
alternates with
USB ACCESSORY NEEDS TOO MUCH POWER
For help press
The USB accessory is drawing too much electrical
current. Printing cannot continue.
Remove the USB accessory, and then restart the
product.
Use a USB accessory that uses less power or that
contains its own power supply.
USB accessory not recognized
For help press
alternates with
USB accessory not recognized
To clear press OK
The product does not support plug-and-play
operation for the type of USB accessory in the
host USB port, or the accessory is not supported
With the USB accessory connected, turn the
product o and then on. If the message
reappears, remove the USB accessory.
USB printing unavailable
For help press
The administrator has disabled printing from USB
accessories.
Print the job from a computer that is connected
to the product.
USB storage accessory removed
Clearing any unassociated data
You have removed the USB accessory from the
product. The product cancels any jobs from the
accessory that are in the print queue.
To print the remaining jobs, reinsert the USB
accessory and select the jobs again.
USB STORAGE DEVICE FAILURE
To clear press OK
The specied device has failed. Press the OK button to continue.
USB STORAGE FILE OPERATION FAILED
To clear press OK
A command attempted an illogical operation. Press the OK button to continue.
USE TRAY <X> [TYPE] [SIZE]
To change press / .
To use press OK
The product did not detect the type and size of
paper requested. The message shows the most
likely type and size available and the tray in
which they are available.
Press the OK button to accept the values in the
message, or press the up or down arrow / to
scroll through the available choices.
USED SUPPLY IN USE
Economode disabled
The print cartridge has been previously used. If you believe you purchased a genuine HP
supply, go to www.hp.com/go/anticounterfeit.
USED SUPPLY INSTALLED The print cartridge has been previously used. Press the OK button to use this cartridge, or
install a new cartridge.
If you believe you purchased a genuine HP
supply, go to www.hp.com/go/anticounterfeit.
158 Chapter 10 Solve problems ENWW