HP LaserJet P3010 Series - User Guide

ManualsBrandsHP ManualsPrint & ScanCE525A

161

162

163

164

165

166

167

168

169

170

Table 10-1 Control-panel messages (continued)

Control panel message Description Recommended action

Too many trays installed

Turn power o and uninstall a tray

You have installed more optional trays than the

product supports.

The product can accept up to two optional 500-

sheet trays.

Remove one of the optional trays.

Too many USB accessories

For help press

The does not support this many USB storage

accessories.

Remove the extra USB storage accessories until

this message goes away. Then, remove and

reinsert the new USB storage accessory.

Too many USB hubs

Remove latest USB hub

The product has detected that a USB hub is

connected to another USB hub.

Remove the extra USB hub. The product does

not support USB hubs connected to other USB

hubs.

TRAY <X> [TYPE] [SIZE]

To change size or type press OK

alternates with

TRAY <X> [TYPE] [SIZE]

To accept settings press

This message states the current type and size

conguration of the paper tray, and allows you to

change the conguration.

To change the paper size or type press the OK

button while the message is present. To clear the

message, press the back arrow while the

message is present.

●

Select the ANY SIZE and ANY TYPE settings

if the tray is used frequently for dierent

sizes or types.

●

Set size and type to a specic setting if

printing with only one type of paper.

TRAY <X> OPEN

For help press

alternates with

The tray cannot feed paper to the product

because tray [X] is open and must be closed for

printing to continue.

Check the trays and close any that are open.

Unable to add more les to print

Wait for a job to nish printing

The print queue has the maximum number of

jobs.

Wait for a job to nish before adding another job

to the print queue.

UNABLE TO READ ENTIRE DIRECTORY

To continue press OK

The list of les on the USB accessory is longer

than the product can display.

1. To print a le from the partial list, press the

OK button and then select a le from the

list.

2. To prevent this problem, remove les from

the USB accessory.

UNABLE TO STORE JOB

alternates with

The print job named cannot be stored because of

a memory, disk, or conguration problem.

Correct the error and then try again to store the

job.

UNSUPPORTED SUPPLY IN USE The print cartridge is for a dierent HP product. If print quality is no longer acceptable, replace

the print cartridge. See Change the print

cartridge on page 120.

For a list of supported print cartridges, see Part

numbers on page 199.

UNSUPPORTED SUPPLY INSTALLED The print cartridge is for a dierent HP product. If print quality is no longer acceptable, replace