HP LaserJet P3010 Series - User Guide

Table 10-1 Control-panel messages (continued)
Control panel message Description Recommended action
INSUFFICIENT MEMORY TO LOAD FONTS/DATA
For help press
alternates with
<DEVICE>
To continue press OK
The product received more data than can t in its
available memory. You might have tried to
transfer too many macros, soft fonts, or complex
graphics.
Press the OK button to print the transferred data
(some data might be lost).
Simplify the print job or install additional
memory.
LOAD TRAY 1 [TYPE] [SIZE]
To continue press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty. Load Tray 1 with the requested paper.
If the paper is already in the Tray 1, press the
help button , and then press the OK button to
print.
To use another tray, remove paper from Tray 1,
and then press the OK button to continue.
LOAD TRAY 1 [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty and other trays are available. Press the OK button to use another tray.
To use Tray 1, load it with the requested paper.
If the paper is already in the Tray 1, press the
help button , and then press the OK button to
print.
To use another tray, remove paper from Tray 1,
and then press the OK button to use another
tray.
LOAD TRAY <X> [TYPE] [SIZE]
For help press
The indicated tray is congured for a specic
type and size of paper needed by a print job, but
the tray is empty. All other trays are also empty.
Load the requested paper in the tray.
LOAD TRAY <X> [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY <X> [TYPE] [SIZE]
For help press
A job is sent that requires a specic type and size
that is not available in the tray that is indicated.
Press the OK button to use a type and size that
are available in another tray.
MANUALLY FEED <TYPE> <SIZE> The product is waiting for you to load paper in
Tray 1.
If paper is already in the Tray 1, press the help
button , and then press the OK button to print.
To use another tray, remove paper from Tray 1,
and then press the OK button.
MANUALLY FEED <TYPE> <SIZE>
To continue press OK
alternates with
MANUALLY FEED <TYPE> <SIZE>
For help press
The product is waiting for you to load paper in
Tray 1.
Load the requested paper into Tray 1 and press
the OK button.
154 Chapter 10 Solve problems ENWW