HP LaserJet P3010 Series - User Guide

Table 10-1 Control-panel messages (continued)
Control panel message Description Recommended action
EIO <X> DISK NOT FUNCTIONAL
For help press
The EIO disk in slot X is not working correctly. 1. Turn the product o.
2. Make sure the EIO disk is inserted correctly
and securely fastened.
3. If the control panel message continues to
appear, replace the disk.
EIO <X> DISK SPINNING UP
alternates with
<Current status message>
The disk accessory in EIO slot [X] is initializing. No action is necessary.
EIO DEVICE FAILURE
To clear press OK
The specied device has failed. Press the OK button to continue.
EIO FILE OPERATION FAILED
To clear press OK
A command attempted an illogical operation. Press the OK button to continue.
EIO FILE SYSTEM IS FULL
To clear press OK
The specied le system is full and cannot be
written to.
Press the OK button to continue.
EIO IS WRITE PROTECTED
To clear press OK
The le system cannot be written to. Press the OK button to continue.
Event log empty You are attempting to view an empty event log
by selecting the SHOW EVENT LOG option from
the control panel.
No action is necessary.
INCOMPATIBLE BLACK CARTRIDGE The print cartridge is for another product. Replace the print cartridge with a print cartridge
for this product. See Change the print cartridge
on page 120.
For information about print cartridges that this
product supports, see Part numbers
on page 199.
Incorrect The wrong PIN number was entered. Reenter PIN number.
INFLATE FAILURE
SEND RFU UPGRADE ON USB DEV PORT
An error occurred during a rmware upgrade. Contact an HP-authorized service or support
provider.
Initializing Individual tasks are being initialized. No action is necessary.
INSERT OR CLOSE TRAY <X>
For help press
The specied tray is open or missing. Insert or close the tray for printing to continue.
INSTALL BLACK CARTRIDGE
For help press
The print cartridge is missing. 1. Open the top cover.
2. Install the cartridge.
3. Close the top cover.
ENWW Interpret control-panel messages 153