HP LaserJet P3010 Series - User Guide
Table 10-1 Control-panel messages (continued)
Control panel message Description Recommended action
CHOSEN PERSONALITY NOT AVAILABLE
To continue press OK
The product received a request for a personality
(product language) that does not exist. The print
job is canceled.
Print the job using a printer driver for a dierent
product language, or add the requested
language to the product (if available).
To see a list of available personalities, print a
conguration page.
CLEANING DISK <X>% COMPLETE
Do not power o
alternates with
CLEANING DISK <X>% COMPLETE
For help press
The storage device is being sanitized or cleaned.
Do not turn o. Product functions are
unavailable. The product automatically turns o
and then on when nished.
No action is necessary.
CLEANING PAGE ERROR
Open rear door
You are processing a cleaning page with the rear
door closed.
Open the rear output bin to begin creating or
processing the cleaning page.
CLEANING...
DO NOT GRAB PAPER
The product is performing an automatic cleaning. No action is necessary.
Clearing event log The product is clearing the event log. No action is necessary.
Clearing paper path The product jammed or was turned on and paper
was detected in a wrong location. The product is
automatically attempting to eject the pages.
Wait for the product to nish trying to clear the
pages. If it cannot, a jam message displays on
the control panel.
CODE CRC ERROR
SEND RFU UPGRADE ON USB DEV PORT
An error occurred during a rmware upgrade. Contact an HP-authorized service or support
provider.
DATA RECEIVED
To print last page press OK
alternates with
<current status message>
The product is waiting for the print command. Press the OK button to continue.
DATE/TIME = YYYY/MMM/DD HH:MM
To change press OK
To skip press
The current date and time. Set the date and time or press the stop button
to skip.
Deleting... Product is deleting a stored job. No action is necessary.
DUPLEX OPERATION FAILED
To continue press OK
alternates with
DUPLEX OPERATION FAILED
For help press
A timing error has occurred during a duplex
printing job.
Press the OK button to continue printing. If the
error occurs again, cancel the job and print it as a
single-sided job.
152 Chapter 10 Solve problems ENWW