HP LaserJet P3010 Series - User Guide
4. If the EIO card requires a cable connection, connect the cable.
5. Turn on the product, and then print a conguration page to verify that the new EIO card is recognized. See
Print the information and show-me-how pages on page 106.
NOTE: When you print a conguration page, an HP Jetdirect conguration page that contains network
conguration and status information also prints.
Remove an EIO card
1. Turn o the product.
2. Disconnect any cables from the EIO card.
3. Loosen the two screws from the EIO card, and then remove the EIO card from the EIO slot.
4. Place the cover plate from the EIO slot onto the back of the product. Insert and tighten the two screws.
5. Turn on the product.
134 Chapter 9 Manage and maintain the product ENWW