HP LaserJet P3010 Series - User Guide
Install memory, internal USB devices, and external I/O cards
Overview
The formatter has the following open slots and ports for expanding the product's capabilities:
●
One dual inline memory module (DIMM) slot for upgrading the product with more memory
●
Two internal USB ports for adding fonts, languages, and other third-party solutions
●
One external I/O (EIO) slot for adding an external print server, an external hard disk, or a parallel port
If the product already has an embedded HP Jetdirect print server installed, you can add an additional
networking device in the EIO slot.
For information about ordering specic components, see Supplies and accessories on page 197.
To nd out how much memory is installed in the product or to nd out what is installed in the USB ports or the
EIO slot, print a conguration page.
Install memory
You might want to add more memory to the product if you often print complex graphics, print PostScript (PS)
documents, or use many downloaded fonts. Added memory also gives you more exibility in supporting job-
storage features, such as quick copying.
This product supports printing PDF les when 96 MB of memory is installed. However, for the best performance,
upgrade the memory to at least 192 MB.
NOTE: Single inline memory modules (SIMMs) used in previous HP LaserJet products are not compatible with
the product.
Install product memory
This product has one DIMM slot.
CAUTION: Static electricity can damage electronic parts. When installing DIMMs, either wear an antistatic wrist
strap or frequently touch the surface of the DIMM antistatic package, and then touch bare metal on the product.
1. If you have not already done so, print a conguration page to nd out how much memory is installed in the
product. See Print the information and show-me-how pages on page 106.
124 Chapter 9 Manage and maintain the product ENWW