HP LaserJet P3010 Series - User Guide

Set advanced printing options
To perform the following tasks, open the printer driver and click the Advanced tab.
How do I Steps to perform
Select advanced printing options In any of the sections, click a current setting to activate a drop-
down list so you can change the setting.
Change the number of copies that are printed
NOTE: If the software program that you are using does not
provide a way to print a particular number of copies, you can
change the number of copies in the driver.
Changing this setting aects the number of copies for all print jobs.
After your job has printed, restore this setting to the original value.
Open the Paper/Output section, and then enter the number of
copies to print. If you select 2 or more copies, you can select the
option to collate the pages.
Load letterhead or preprinted paper the same way for every job,
whether printing on one or both sides of the page
a) Open the Document Options section, and then open the Printer
Features section. b) In the Alternative Letterhead Mode drop-down
list, select On. c) At the product, load the paper the same way you
would for printing on both sides.
Change the order in which pages are printed a) Open the Document Options section, and then open the Layout
Options section. b) In the Page Order drop-down list, select Front to
Back to print the pages in the same order as they are in the
document, or select Back to Front to print the pages in the reverse
order.
ENWW Use features in the Windows printer driver 103