HP LaserJet P3010 Series - User Guide

Set document nishing options
To perform the following tasks, open the printer driver and click the Finishing tab.
How do I Steps to perform
Manually print on both sides (duplex)
NOTE: This information applies to products that do not have an
automatic duplexer.
1. Load paper face-up in Tray 1 or face-down in Tray 2.
2. In the printer driver, select the Print on both sides (manually)
check box. If you will bind the document along the top edge,
select the Flip pages up check box.
3. Click the OK button to print the rst side of the job.
4. Retrieve the printed stack from the output bin, and place it
with the printed-side facing down in Tray 1 or facing up in
Tray 2.
5. Press the OK button to print the second side of the job.
Automatically print on both sides (duplex)
NOTE: This information applies to products that have an
automatic duplexer.
1. Load paper face-up in Tray 2.
2. In the printer driver, select the Print on both sides check box. If
you will bind the document along the top edge, select the Flip
pages up check box.
3. Click the OK button to print the job.
Print a booklet a) Select the Print on both sides check box. b) In the Booklet layout
drop-down list, click the Left binding or Right binding option. The
Pages per sheet option automatically changes to 2 pages per sheet.
Print multiple pages per sheet a) Select the number of pages per sheet from the Pages per sheet
drop-down list. b) Select the correct options for Print page borders,
Page order, and Orientation.
Select page orientation a) In the Orientation area, select the Portrait or Landscape option.
b) To print the page image upside down, select the Rotate by 180
degrees option.
ENWW Use features in the Windows printer driver 101